| 包装类型 | 箱 |
|---|---|
| 产品规格 | 25 |
| 成分 | 其他 |
| 主要用途 | MS胶抗菌剂 |
| 化学成份 | 异噻唑啉酮 |
| 类型 | 其他 |
| 外观 | 淡绿色 |
| 有效物质含量 | 20 |
| 含量 | 99.99 |
| PH值使用范围 | 1-14 |
| 品牌 | 瑞士龙沙 |
| 型号 | Densil DN |
The product is a novel biocide containing the active ingredient N-butyl-1,2- benzisothiazolin-3-one (BBIT). DENSIL? DN has a broad spectrum of activity against fungi, algae, yeast and bacteria. DENSIL? DN can be used in many different application areas to offer dry film and wet state preservation. Applications DENSIL? DN is effective in many different applications areas including: – Acrylic Emulsions – Polyurethane Adhesives – Emulsion Paints – Ink jets – metal Working Fluid Emulsions and Concentrates – Pigments – Plasterboards – Polymer Emulsions – Sealants – Silicone Emulsions – Starches – Tile Grouts – Thickeners MicrobialControl DENSIL? DN Materials Protection S N O2 Microbial Control DENSIL? DN Technical Information Notes for Materials Protection l Properties Table1. Minimum Inhibitory Concentrations (MIC) Micro-organism ppm Product Fungi Alternaria alternata 25 Aureobasidium pullulans 4 Aspergillus niger 16 Chaetomium globosum 1.6 Cladosporium cladosporoides 19 Cladosporium herbarum 2.3 Gliocladium virens 62 Paecilomyces variotti 4 Penicillium funiculosum 3 Phoma violacae 2 Scopulariopsis brevicaulis 37 Trichoderma viride 50 Algae Chlorella vulgaris 16 Nostoc muscorum 16 16Oscillatoria tenuis 16 Pleurococcus sp. 16 Trentepohlia aurea 16 Yeast Candida albicans 19 Rhodoturula mucilaginosa 4 Saccharomyces cerevisiae 0.4 Bacteria Acinetobacter baumanii 14 Alcaligenes faecalis 20 Bacillus subtilis 4 Corynebacterium sp. 1.4 Escherichia coli 87.5 Flavobacterium capsulatum 11 Klebsiella pneumoniae 137 Lactobacillus brevis 2.1 Proteus mirabilis 137 Pseudomonas aeruginosa 200 Staphylococcus aureus 2.5 Streptomycetes Streptoverticillium waksmanii 23 Table 2. Typcial Physical Properties of DENSIL? DN Active Agent Content (%) 97% w/w min BBIT Physical Form Liquid Bulk Density at 25°C 1.17g/ml pH at 25°C N/A Viscosity cP (Brookfield LV 12rpm spindle 3 @ 2°C) 90 Water Content <0.5% Storage Stability Stable under normal conditions of storage. If frozen, allow to thaw before use. Active agent is heat-stable and non-volatile. Colour Yellow Vapour Pressure @25°C 0.015 Pa Flash Point 178°C Odour Mild or none Compatibility The active ingredient BBT is incompatible with thiols, bleach and metabisulphites. Compatible and effective over pH range 2-12. Good stability in the presence of amines. Amount to Use DENSIL? DN should be added to the system as early in the process as possible. The concentration to adequately preserve your produ0002 uct depends on several factors. These include the susceptibility of the sysu0002 tem to microbiological degradation, the extent to which micro-organisms can gain access, the species involved, pH, temperature, and length of time for which protection is required. A range of concentrations and applications is given in Table 3; however, it is recommended that a testing programme be undertaken to determine the most cost-effective dose for your application. Testing should take into account chemical compatibility/stability, plant hygiene conditions, susceptibility of the product to contamination, and the typical organisms involved. The Lonza Technical Service Group can provide additional guidance on the proper use of DENSIL? DN for your particular application. Table 3. Application Information Application Concentration (% based on total weight of final product) Acrylic Emulsions 0.03 to 0.05 Adhesives 0.1 to 0.3 Emulsion Paints 0.03 to 0.05 Ink Jets 0.1 to 0.25 metal Working Fluid Concentrates 0.1 to 0.3 Pigments 0.025 to 0.05 Plasterboard 0.1 to 0.3 Polymer Emulsions 0.025 to 0.05 Sealants 0.1 to 0.3 Silicones 0.05 to 0.3 Starches 0.1 to 0.3 Tile Grouts 0.1 to 0.3 Thickeners 0.1 to 0.3